Turboclean -
a solution for non-stop
filtration Particles are pushed to the
debris area, and the filter screen remains clean at all times. The
Turboclean consists of a screen cylinder with an inside Torpedo
device which prevents particles from remaining on the screen.
Periodical opening of the drain port releases the dirt from the
debris area without the need to open the filter for cleaning.
Autoflush - automatic flushing of
Turboclean filters
The Autoflush is supplied
with a hydraulic valve that opens automatically by means of an
electronic timer. The timer allows the determination of the flushing
duration intervals. This is applicable to 3" LT-S filters or for 2
or more filter units operated in sequence.
Brushaway - for Semi-Automatic cleaning of 4"-14" filters
Made of nylon brushes on a stainless steel frame, which is threaded into the filter lid and inserted inside the stainless steel screen. A simple handle, outside the filter lid, allows it to brush away the filter particles laying on the screen. Brushing is performed without stopping the water supply.
New Scanaway and Brushaway units
Scanaway - for manual cleaning of Amiad 2"/3" filters
The scanaway assembly consists of a hollow PVC pipe with suction nozzles that face the inner side of the screen. A handle, connected to the suction scanner from the outside, turns the scanner so that it rotates without touching the screen surface. Opening an exhaust valve creates a low pressure condition, which causes the scanner nozzles to suck in the dirt from the screen's surface.
Scanning can be done during the filter process without interrupting the water flow.
Available as a retro-fit assembly kit for use with existing Amiad filters 2"T and 3"T
Brushaway - for manual cleaning of Amiad 2"-14" filters
This device provides a quick and efficient cleaning of manual filters.The Brushaway assembly consists of nylon brushes that are fitted on a stainless steel frame and inserted into the filter screen. A simple handle, outside the filter, enables brushing away particles from the screen's surface. Brushing is done during the filtering process without stopping the water flow.
Regular brush cleaning requires minimal system shut down or handling of internal parts.
There is no additional head loss through the filter when installed.
Recommended for filtration degrees of 200 micron and coarser.
Available as a retro-fit assembly kit for use with existing Amiad filters.
Turboclean - a solution for non-stop filtration
Particles are pushed to the debris area, and the filter screen remains clean at all times. The Turboclean consists of a screen cylinder with an inside Torpedo device, preventing particles from remaining on the screen. Periodical opening of the drain port releases the dirt from the debris area without opening the filter for cleaning.
